Archive | January 2017

Random Rail Shot

End of The Line –

The post marking the End of Track of what is left of the Northern heading railroad-south out of West Lebanon NH.  The End of Track marker is across the Glen Road stone overpass, just prior to the first bridge over the Mascoma River as you head south.  This section of track has only been used occasionally for car storage over the past few years, but it does represent the end of in-use track, at least for now.

eot_web

Operations Department

Enfield Local Part III

Ahhhh, the long awaited Part III of my Enfield Local post.  I want to clarify ahead of time that I understand that I am mixing prototype operating schemes around.  Right now I run all of my trains on train orders, because it’s easier for me to keep track of operations on my small layout using one form.  While this post is titled “Enfield Local”, since I currently lack an attached yard, I am actually running this train as an extra (WJ-01), rather than an appropriate train from the timetable I presented in the last post on this subject.  Bear with me; this is all a work in progress.

So, for this operating session I used the train order shown below (they’re normally hand written, but my writing is often barely legible, so I typed this one for clarity).  Aside from the basic information, we see that train WJ-01 needs to pick up three cars and drop off five to various customers in Enfield.  I always list pick-ups, drop-offs, and assigned power for each train.  Typically, I try to use the P/U section as a guide for building the train for the return trip; however, as I said, I’m still dusting off cobwebs.

wj-01-extra-train-order

The session begins with train WJ-01 entering the layout south-bound by passing under the “Rt 4” bridge.  Whoever built this train in White River did a terrible job as the B&M coal hopper towards the middle is actually the first car needing to be dropped off.

rt4inbound

WJ-01 then enters Enfield proper by passing through the cut which is just railroad north of the Main Street overpass, the rear of the train will be left in this cut while Caspian Mills is switched.

cutinbound

The front half of the train is dragged onto the passing siding across from the Enfield depot.  GP-7 1557 is run around to the rear of the shortened consist and B&M 7199 is plucked from the rear.  The locomotive and inbound coal load are now run around on the main and switched off to the Caspian Mills spur.  The outbound Rutland and Missouri Illinois empties are backed out of their spots on the siding and placed further south on the main.  B&M 7199 is then spotted on the coal dump for the mill power plant.  NOTE:  Yes, I realize I forgot to empty Rutland 10006 before pulling it from the coal dump.

coalrunaround

caspianpu

With Rutland 10006 and MI 96599 parked safely to the south on the main, the locomotive is then run around the cars on the passing siding again and they are pulled north, over the Mascoma River.

caspainboxcarbu

This string of cars is then shoved south, through Enfield, onto the Caspian Mills spur so RUT 351 and VTR 341 can be spotted at the Caspian Mills loading dock.

caspianboxcardo
That concludes switching for Caspian Mills and Part III of this series.  The next installment will feature switching for Wayne Feeds, the Enfield Freight House, and hopefully conclude my coverage of this specific subject.

Vintage N Scale B&M Rolling Stock #13

Bachmann 70 Ton 40’ Quad Hopper –

To begin with, this is my first post in well over a year, so I suspect I’ll need to knock off some cobwebs.  I’m running out of vintage B&M N scale stuff to cover, the pickings are getting slim, but I have one or two locomotives to cover and maybe four to five more freight cars before the vintage B&M stuff runs its course.  In the meantime, let’s press ahead.

bachmann-70-ton-hopper-568286

By all appearances, this Bachmann car is an oddball.  I think it’s supposed to represent a 70 ton ARA quad hopper, B&M did actually own quite a few cars matching that general description, numbered 8000-8999.  Interestingly, the black paint and rectangular herald with B&M reporting marks appear to be appropriate for a late-1930s paint job on one of these cars.  It’s starting to seem like Bachmann might have nailed it… that is, until you check out the road number.  If you dropped the 56 from the front, you would indeed have a correct road number for one of these 1920-1930s built cars, and the authenticity would almost be complete, especially for an N scale car dating back as far as the 1960s or 1970s.  Bachmann just couldn’t handle coming so close to historical accuracy, and thus, missed the boat.

The build date printed on the car side is 6-24, which means June of 1924… that would have been early for the B&M cars which apparently began showing up around 1929.  Those printed build dates are typically nonsense on these early N scale cars, so I’m actually a little surprised Bachmann was so close.

I’m not sure that these cars count as rare, there are normally one or two available on the auction sites and those normally sell for around $10 USD, not too pricey.

My overall opinion is that the car is a typical, early N scale, generic freight car.  Early N scale operators probably weren’t overly picky, this car breaks up the monotony of blue dip offerings from other manufacturers.  Like most of these classic N scale items, I recommend picking one up for display and/or operation.

Historical Information:

As stated above, B&M owned around one thousand of these ARA 70 ton hoppers, numbered 8000-8999.  Boston and Maine’s fleet of these useful cars was acquired between the late 1920s and the early 1930s.  It appears some quantity was sold to DL&W in the 1950s and a few soldiered on with B&M into the 1960s.

UPDATE

I think I’m going to have a little more time on my hands in the middle of the night.  So… it looks like I’ll be back to updating Boston N Maine within the next week or so.  If you’ve been patiently waiting, thank you.  If you’re new, I hope getting back to this blog will serve to both entertain and educate.